Loading pipe and visit traps are located on the top of
the unit. The infected product is easily loaded by pumping
and can be done directly along the harvesting process or at
once from an intermediate storage tank. The vaccine
growth medium doesn’t need to be deactivated first.

WITH THE AVxxxxL MODEL:
A pre-heating system allows the unit to reach the nominal
working temperature before loading the vaccine growth
medium.

The operator can begin the cycle from the touch screen
terminal. From this point onwards the processing is
completely automatic:
• The mixing shaft (3) rotates the product.
• Fresh air (12) enters through the heat exchanger
into the airspace (7) above the product in the
dehydration tank.
• Fresh air, vapors and gases emitted from the product
are sucked through a ductwork system (8) by a turbo
fan (9) into the combustion chamber (10) where they
are then burned.
• Odors and bio-hazards are broken down and removed.
• The hot air produced by the burner (5) is circulated
through the double jacket (6) then up through the heat
exchanger, and finally through the exhaust fan (13)
and chimney.
• When the product reaches the preset level of dryness,
the burner flame will automatically cease and the
circulating fresh air will cool down the overall equipment
and product.
• When the cycle is complete, the unit stops automatically.

To unload the dehydrator, the operator simply opens the
outlet door, put in the body protection and turns on the
unloading cycle. The mixing shaft is set into reverse
rotation, which forces the treated product through the
outlet door. No special cleaning or preparation is needed
to begin processing the next load.

By-product analysis

This table includes indicative data only and
can not be set as contract. Data may vary.